AUTOMOTIVE Window Tinting Services in Minneapolis, MN

Tint Pros LLC proudly warranties window film for as long as you own the vehicle — a lifetime warranty against fading to purple, bubbling peeling, cracking, delaminating, oxidation, and corrosion. Tint Pros LLC does not cover any scratches, nicks, cuts to the window film or if the window was broken. While we strive for perfection in our installations, due to the nature of the product, some degree of dust contamination and/or minor imperfections are present in every window film application. Pre-existing flaws, scratches, or metal deposits on the glass of your windows are often much more noticeable after the windows are tinted. If warranty work needed please leave the window tint as is for us to properly remove and replace the window film. Warranty will be voided if consumer removes any window film from window unless specified by Tint Pros Specialist.

In Minnesota, passenger cars must let more than 50% of visible light through every window except the windshield — that includes the back side windows and the rear window, not just the front doors. This is the part most people get wrong. Pickup trucks, vans and SUVs are different: their front side windows still have to meet the 50% rule, but everything behind the driver can be as dark as you want. No aftermarket tint of any kind is allowed on the windshield. See the full Minnesota tint Legal Limits, Medical Exemptions & Penalties guide.

Regular window tint, such as dyed or metalized film, can reduce glare and add privacy, but it doesn’t provide the same level of heat rejection or long-term durability. Over time, these films may fade, bubble, discolor, or even interfere with your vehicle’s signals.

Ceramic window tint uses advanced nano-ceramic technology to block significantly more heat and harmful UV rays without using metal or dyes. That means:

Superior heat rejection
UV protection
No signal interference with electronics
Clear, crisp visibility
Long-lasting performance
Ceramic window tint is what we at Tint Pros highly recommend.

For Minnesota drivers facing hot summers and bright winter glare off the snow, ceramic tint delivers year-round comfort, protection, and performance you can truly feel.

Cleaning: Do not use ammonia, scrapers, scrubber pads, or other various chemicals to clean window film. We recommend any cleaning spray clearly labeled “safe for tinted windows” or soap and water and a soft microfiber towel. Black Dots: Most cars have a black, dotted, ceramic edge on the rear window. These black ceramic dots are thick and prevent the window film from sticking to the area between the dots.

Yes. Window tint is designed to reduce light and heat transmission into the vehicle. This helps keep the interior cooler and more comfortable.

No. You should not roll your windows down or try to push out the water until the tint has fully dried. Doing so can damage the film before it cures.

The front two windows take about an hour. A full set of door windows is also about an hour. Add the windshield and plan on two hours total; the windshield alone runs about an hour. (Windshield tint in Minnesota requires a documented medical exemption — see our Minnesota tint guide.) You can drive home right away — just keep the windows up for the first few days while the film cures.

ULTRAFIT, exclusively — we are certified installers and stock three lines: HI Performance, Ceramic with 88% infrared rejection, and Nano-Ceramic with 98% infrared rejection. The difference you feel is heat: infrared rejection is what keeps the cabin cool in July, and it is a separate number from how dark the film looks. Every line carries a lifetime warranty.